Up to three Xilinx Virtex 6 FPGAs per board with FPGA sizes up to LX550T or SX475T. They are available with up to 7 GBytes DDR2 DRAM for 22.4 GB/s and up to 448 MBytes DDRII+ or QDRII SRAM for 25.2 GB/s. Up to 1.6 million logic cells and 2.7 million multiplier bits per board. Air Cooled Only.
FPGA Boards - 6U
Annapolis FPGA boards are engineered for superior performance and maximum bandwidth. Both Intel and Xilinx FPGAs are leveraged to offer the best FPGA technology available and to fit customer preference, design requirements and production schedule.
Following are Annapolis’ latest 6U boards. You can find all 6U boards listed below the table.
|Part #||FPGA Qty||FPGA Type||SoC Type||Inte-grated I/O||Band-width*||Cooling||Temp||Open Standards|
|WB6XZ3||4||UltraScale or UltraScale+||UltraScale+||No||40GbE||Air||-40˚ to +70˚||VITA 65|
|WB6XB2||3||UltraScale+||UltraScale+||No||100GbE||Air or Conduction||-55˚ to +85˚||SOSA|
|WB6XBU||3||UltraScale+||UltraScale+||Yes||100GbE||Air or Conduction||-40˚ to +70˚||SOSA|
|WB6XU2||1 or 2||UltraScale or UltraScale+||Zynq-7000||No||40GbE||Air or Conduction||-40˚ to +70˚||VITA 65|
*Bandwidth per Backplane Port
These FPGA cards paired with Annapolis OpenVPX compliant 6U backplanes enable even the most bandwidth intensive applications. With included High Speed Serial (HSS) FPGA IP cores (including 40GBASE-KR), there is up 36 GB/s of backplane bandwidth on data and expansion planes.
If I/O is required, Annapolis offers extraordinary density, bandwidth and analog conversion choices. Each 6U card has two mezzanine IO sites which can support up to four WILDSTAR™ Mezzanine cards as well as a QSFP+ option (on WILDSTAR 7 and WILDSTAR A5 boards) that allows for six QSFP+ transceivers per slot.
Other 6U FPGA card features include Hot Swap, On-Board dual core PowerPC, Management Processor connected to OpenVPX IPMI Management Plane, backplane user IO (LVDS, HSS, IRIG, Clocking), front panel RJ45 for PowerPC and front panel SMA (IRIG, Clocking).