The WILDSTAR SAF1 Small Form Factor Module is a SWaP-optimized Direct RF module that delivers high-performance processing and four channels each of 64 GSps A/D and D/A converting at 10-bit resolution.
This is the lowest latency and highest bandwidth 64 GS/s small form factor solution on the market.
Want the same Agilex Direct RF capability in a 3U VPX form factor? See the WILDSTAR 3AE1 3U OpenVPX Board.
The WILDSTAR 3AE1 FPGA Processor is 100GbE-enabled, SOSA-aligned, and it leverages the processing and A/D & D/A converting power of one or two Intel Agilex Direct RF-Series AGRW014 FPGAs.
This is the lowest latency and highest bandwidth 64 GS/s 3U VPX solution on the market.
Want the same 64 GS/s Direct RF sampling capability in an even smaller form factor? See the WILDSTAR SAF1 Small Form Factor Module.
The WILDSTAR 3AA2 integrates Intel's powerful Agilex M-Series AGM 032 or AGM 039 FPGA. It is 100GbE-enabled, SOSA-aligned, and highly rugged and thermally-controlled.
Need the same SOSA-alignment and 100GbE capability in a 6U VPX form factor? See the WILDSTAR 6XB2 6U OpenVPX Board.
The WILDSTAR Gen2 RTM for 3U OpenVPX, a member of the WILD40/WILD100 EcoSystem™ for OpenVPX, performs high-speed, general-purpose I/O transfers between WILDSTAR OpenVPX Baseboards and other components. This hot-swappable card provides two USB ports, two Micro-D connectors, and three optional optical transceivers.
RTMs facilitate high-speed and general-purpose I/O transfers between WILDSTAR™ 6U OpenVPX motherboards and other components.
This Rear Transition Module is compatible with WILDSTAR UltraK and WILDSTAR A10 6U OpenVPX motherboards.
WILDSTAR™ A10 2PE for 6U OpenVPX boards include two Intel Arria 10® GX900, GX1150, GT1150 FPGAs with High Speed Serial connections performing up to 15 Gbps. There is also an on-board dual ARM Cortex-A9 Processor running up to 925 MHz which can be used for local application requirements without using PCIe bandwidth.
WILDSTAR™ A10 3PE for 6U OpenVPX boards include three Intel Arria 10® GX900, GX1150, GT1150 FPGAs with High Speed Serial connections performing up to 15 Gbps. There is also an on-board dual ARM Cortex-A9 Processor running up to 925 MHz which can be used for local application requirements without using PCIe bandwidth.
The LVDS RTM For 3U OpenVPX, a member of the WILDSTAR™ /VPX family of high performance Mezzanine Cards, performs high-speed, general-purpose I/O transfers between WILDSTAR /VPX motherboards and other components. The card provides up to 56 single-ended lines and 32 differential LVDS pairs between a WILDSTAR /VPX processing board and an external system.
Up to two Intel Stratix® V FPGAs per board with choice of GX parts up to 5SGXAB or GS parts up to 5SGSD8 and up to 8 GB of DDR3 DRAM for 51.2 GB/s of DRAM bandwidth. Up to 1.9 million logic elements and 2.9 million multiplier bits per board. Air or Conduction Cooled.
Up to three Intel Stratix® V FPGAs per board with choice of GX parts up to 5SGXAB or GS parts up to 5SGSD8, up to 192 MB of QDRII+ SRAM for 118 GB/s of SRAM bandwidth and up to 16 GB of DDR3 DRAM for 128 GB/s of DRAM bandwidth. Up to 2.8 million logic elements and 4.3 million multiplier bits per board.