WILDSTAR 6B10 6U OpenVPX InfiniBand Switch is a rugged 6U board that provides switching between backplane slots of multiple channels of 100Gb EDR Infiniband. It also has front panel I/O which can be used to connect the system to external data sources.
This high-performance Switch is readily integrated into a vendor-neutral 6U VPX system, or deployed within Annapolis' proven WILD100 EcoSystem for 6U OpenVPX.
This breakthrough Ultra-Wide-Bandwidth (UWB) FPGA Board features a super-high-performance digitizer and processor in a single rugged 6U OpenVPX board. It is designed to handle full ADC input bandwidths in the most challenging data acquisition, processing, and storage applications.
See all of the Annapolis FPGA Boards.
The WILD Single-Slot 6U OpenVPX Chassis is a high-quality 19” rackmount chassis platform consisting of black painted sheet steel enclosure, high performance VITA System backplane, power supply, cooling system and AC/DC power components. Assembled, wired and tested prior to shipment.
WILDSTAR 100GbE 6E10 6U OpenVPX Switch is a rugged 6U board that provides switching between backplane slots of multiple channels of 100Gb Ethernet. It also has front panel I/O which can be used to connect the system to external data sources.
This high-performance Switch is readily integrated into a vendor-neutral 6U VPX system, or deployed within Annapolis' proven WILD100 EcoSystem for 6U OpenVPX.
Looking for a 6U Switch that supports InfiniBand? See our WILDSTAR 6B10 InfiniBand Switch.
Winner of a "Best in Show" Award at AOC Convention!
Two Xilinx® Virtex® UltraScale+™ XCVU9P/XCVU13P FPGAs with up to 29 GB of DDR4 DRAM for up to about 125 GB/s of DRAM bandwidth. Up to 8.7 million logic cells and 27,504 DSP slices per board. Also features two WFMC+ mezzanine I/O sites with stacking support, on-board Zynq Quad ARM CPU and two FireFly 4x transceivers.
High-bandwidth backplane connectivity is enabled by MULTIGIG RT3 interconnects, which deliver 100Gb per Fat Pipe. The new high-density RT3 boosts VPX backplane speeds to a remarkable 25 Gbaud, without sacrificing signal integrity.
Need the same 100GbE capability in a smaller package? See the WILDSTAR 3XBM 3U OpenVPX Board.
WILDSTAR™ UltraKVP ZP 3PE for OpenVPX 6U boards include three Xilinx® Kintex® UltraScale™ XCKU115 or Virtex® UltraScale+™ XCVU5P/XCVU9P FPGAs with High Speed Serial connections performing up to 32 Gbps. There is also an on-board Xilinx® Zynq® UltraScale+™ MPSoC Quad ARM CPU running up to 1.3 GHz which can be used for local application requirements without requiring an additional Single Board Computer (SBC).
RTMs facilitate high-speed and general-purpose I/O transfers between WILDSTAR™ 6U OpenVPX motherboards and other components.
This Rear Transition Module is compatible with WILDSTAR UltraK and WILDSTAR A10 6U OpenVPX motherboards.
When Storage capability is needed, Annapolis offers the highest density OpenVPX storage solutions on the market, with up to 64.0 TB of capacity in a single 1” 6U slot, and up to 10 GB/sec read/write bandwidth. This hot swappable board (10,000 insertion cycles) is 100GbE capable, and is developed in alignment with SOSA™.
Annapolis Storage Solutions are optimized for SIGINT, ELINT, EW, or other high-bandwidth storage applications.
WILDSTAR™ UltraKVP 2PE for 6U OpenVPX boards include one or two Xilinx® Kintex® UltraScale™ XCKU115, Virtex® UltraScale™ XCVU125/XCVU190 or Virtex® UltraScale+™ XCVU5P/XCVU9P FPGAs with High Speed Serial connections performing up to 16.3 Gbps. There is also an on-board dual ARM Cortex-A9 Processor running up to 766 MHz which can be used for local application requirements without using PCIe bandwidth.
WILDSTAR™ A10 2PE for 6U OpenVPX boards include two Intel Arria 10® GX900, GX1150, GT1150 FPGAs with High Speed Serial connections performing up to 15 Gbps. There is also an on-board dual ARM Cortex-A9 Processor running up to 925 MHz which can be used for local application requirements without using PCIe bandwidth.