WILD GM6 Chassis Manager / HMC / SoM – WABGM6

The WILD GM6 Chassis Hardware Management Card delivers the most performance of the WILD HMC/SoM product line. It is VITA 46.11 conformant, with a MPSoC UltraScale+ FPGA (ZU15EG). It is similar to WABGM2, with a more capable FPGA. It is SOSA-aligned and supports Tier 3 requirements.

It is Annapolis-designed, and manufactured in USA.

See all of our Chassis Managers.

The WILD GM6 HMC (System on Module) is optimized for use with VITA 65/SOSA profiles that define all payload I/O and support backplane Maintenance ports (MP01/MP02) as they provide interfaces to multiplex these and/or export over ethernet allowing for access via chassis manager ethernet connection.

An optional Board Support Package (BSP) is available for custom application development and for additional feature support.

 

General

  • VITA 46.11-conformant and SOSA™-aligned with Tier 3 support
  • Xilinx UltraScale+ ZU15EG MPSoC running Linux for CHmC
    • Processing Subsystem (PS)
      • Quad core A53 ARM running at 1.2 GHz
      • Dual core R5 ARM
      • 4GB DDR4 DRAM
      • 128MB QSPI NOR
    • Programmable Logic subsystem (PL)
      • 747K System Logic cells in Programmable Logic
      • 31.5Mb of UltraRAM
  • MicroSemi Polarfire MPF200T for security functions
    • 192K Logic Elements
    • 13.3 Mb Internal RAM
    • 297Kb internal uPROM bits
    • Boots from internal flash
    • SPI NOR for in system updates
  • Supports up to 16 slots for JTAG and Maintenance Port Aggregation/muxing
    • Provides four sets of MP01/MP02 and two sets of JTAG with dedicated select lines for each for further muxing on backplane
  • Directly attaches to backplane
  • Uses backplane only interface for I/O functions

Chassis Support Functions

  • Up to two Fan SPD and 1 Fan PWM interface
  • Up to three remote temperature sensing interfaces
  • Remote LEDs/Status for OverTemperature, Fan Fail and Power OK
  • Optional security functions for keyfill and zeroize

Other External Connections

  • Optional MIL-1553 interface
  • RS-232 UART for Zynq PS console (PS UART)
  • RS-232 UART for Maintenance port multiplexing (PL UART)
  • Two 10/100/1000 BASE-T interfaces from Zynq PS
  • Supports multiple battery inputs (from backplane or cable)
  • Optional 3rd Connector adds:
    • USB 2.0
    • One 10/100/1000 BASE-T Ethernet
    • 2nd MIL-1553 Interface
    • Additional 10 LVDS
    • Additional four ZYNQ PL HSS

Backplane Management Connections

  • 16 Individual maskable resets/GPIO
  • PS Inhibit/Fail for VITA 62 supplies
  • Four Maintenance Port 1 interfaces (LVCMOS per SOSA)
  • Four Maintenance Port 2 interfaces (LVCMOS per SOSA)
  • Four 3.3V JTAG interfaces
  • AUXCLK/REFCLK input
  • 20 ZYNQ PL GPIO (3.3V)
  • Two 10Gbps capable HSS connections to Zynq PL HSS
  • Dual IPMI connections per VITA 46.11
  • GDISCRETE, NVMRO and SYSRESET outputs

Optional Board Support Package (BSP)

  • Zynq and Polarfire development support
  • Enables customization of Zynq PS, PL and Microsemi logic
  • Required for some security functions
  • Order separately using P/N S00000-7B

Environmental and Mechanical

  • Only requires 3.3V for operation
    • Designed to run from backplane 3.3VAUX
  • Optional support for -65°C to 105°C storage temperature
  • Optional support for -55°C partial operation
  • Supports 3U and 6U backplanes
    • Does not cover any VITA 66/67 openings allowing for full support
    • Consumes five slots of backplane width

The following documentation is available for registered users of our site. Please log in or feel free to register for our site.

Technical Documents

For additional documentation, please contact your Sales Representative.

Product Images
Tags: