WILDSTAR 3E30 3U OpenVPX Switch – WP3E30
The WILDSTAR 3E30 3U OpenVPX Switch is a rugged 3U board that features ultra-high-speed RT4 backplane connectors for up to 200G support. Separate Data and Control plane switching enables encrypted secure communication.
It is VITA 65-compliant and aligned with the SOSA™ Technical Standard.
This next-generation WILD200™ 3U Switch is designed for advanced PAM4 signaling.
The data plane supports up to 10/25/40/50/100/200Gb Ethernet to backplane and 1/10/25/40/50/100Gb Ethernet to optical interfaces.
The control plane supports 1/10 Gb Ethernet to backplane and up to four 1/10 Gb Ethernet or one 40Gb Ethernet to optional front panel optical interfaces.
Both switches are PTP-compliant and TSN-enabled.
The rugged board is available in industrial temperature grades, via air, conduction or air-flow-through (AFT) cooling.
See all of the Annapolis Switches.
![]()
General Features
- Separate Data and Control plane switches
- Developed in alignment with the SOSA™ Technical Standard and CMOSS C4ISR/Electronic Warfare Modular Open Suite of Standards
- Up to ten 40/50/100/200Gb and eight 1/10Gb Ethernet ports
- 4x Data Plane backplane ports can be split into four 1x ports
- Supports encrypted secure communication
Data Plane Switch
- Supports up to 10/25/40/50/100/200Gb Ethernet to backplane
- Supports 1/10/25/40/50 and 100Gb Ethernet to optical interfaces
- Based on Marvell Prestera-DX Switch silicon
- Precision Time Protocol (PTP) compliant with IEEE 1588v1/v2 standard
- IEEE 802.1AE Media Access Control Security (MACsec) Engine
- GCM-AES-128/256
- GCM-AES XPN-128/256
- Time Sensitive Networking (TSN) protocols:
- IEEE 802.1Qbu and 802.3br – Frame Preemption
- IEEE 802.1CM-2018 Profile B to control packet delay and packet delay variation
- Cut-through operation for low latency
- Control and Management Subsystem with integrated Arm CPU cores
- SecureIQ multilayer network-embedded advanced security
- Web GUI for switch status and configuration
Control Plane Switch
- Supports 1/10 Gb Ethernet to backplane
- Supports up to four 1/10 Gb Ethernet or one 40Gb Ethernet to optional front panel optical interfaces
- Based on Marvell Prestera-DX Switch silicon
- Precision Time Protocol (PTP) compliant with IEEE 1588v1/v2 standard
- IEEE 802.1AE Media Access Control Security (MACsec) Engine
- GCM-AES-128/256
- GCM-AES XPN-128/256
- Time Sensitive Networking (TSN) protocols:
- 802.1AS-2020 – High-accuracy timing synchronization
- IEEE 802.1Qav – Credit based per queue shaper
- IEEE 802.1Qbv – Time aware shapers
- IEEE 802.1Qbu and 802.3br – Frame Preemption
- IEEE 802.1Qci – Per-Stream Filtering and Policing
- IEEE 802.1CB – Frame Replication and Elimination
- Cut-through operation for low latency
- Control and Management Subsystem with integrated Arm Cortex CPU cores and external DRAM
- SecureIQ multilayer network-embedded advanced security
- Web GUI for switch status and configuration
Data Plane CPU
- Quad Core A72
- Secure Boot Capable
Optional Front Panel I/O
- Optional Individual 1GbE for Data Plane processor
- Two Data Plane 1/10/25/40/50/100Gb Ethernet optical connections
- One Control Plane 1/10/40Gb Ethernet optical connection
System Management
- System Management using Intelligent Platform Management Interface (IPMI)
- Diagnostic monitoring and configuration
- Current, Voltage and Temperature Monitoring Sensors
Mechanical and Environmental
- 3U OpenVPX (VITA 65) Compliant 1.0″ spacing
- Supports new SOSA/VITA 65 switch profile SLT3-SWH-6F1U7U-14.4.14 and SLT3-SWH-6F8U-14.4.15
- Integrated Heat Sink and Board Stiffener
- Available in Industrial Temperature Grades
- Air, Air-Flow-Through or Conduction Cooled
- Only requires +12V and +3.3VAUX from backplane
- RT4 backplane connectors for up to 200G support
The following documentation is available for registered users of our site. Please log in or feel free to register for our site.
Technical Documents
For additional documentation, please contact your Sales Representative.
