WILDSTAR 3E10 3U OpenVPX Switch – WP3E10

WILDSTAR 3E10 3U OpenVPX Switch is a rugged 3U board that provides switching between backplane slots of multiple channels of 100Gb Ethernet. It also has front panel I/O which can be used to connect the system to external data sources.

This high-performance Switch is readily integrated into a vendor-neutral 3U VPX system, or deployed within Annapolis' proven WILD100 EcoSystem for 3U OpenVPX.

This next-generation 3U Switch features up to 8 40/100Gb Ethernet ports or 32 1/10/25 Gb Ethernet ports.

The Data Plane Switch supports 10/25/40/100Gb Ethernet to backplane, and 1/10/25/40/50/100GbE to optical interfaces. The Control Plane Switch uses a quad Core ARM-7 processor and supports 1/10GbE to the backplane, and 1/10/40GbE to optical interfaces.

The rugged board is available in industrial temperature grades, via air, conduction or liquid cooling.

It is VITA 65-compliant, and aligns with the SOSA™ Technical Standard.

See all of the Annapolis Switches.

General Features

  • Separate Data and Control plane switches and control processors
  • Developed in alignment with the SOSA™ Technical Standard
  • Up to 8 40/100Gb Ethernet ports or 32 1/10/25 Gb Ethernet ports

40/100Gb Ethernet Data Plane Switch

  • Supports 10/25/40/100Gb Ethernet to backplane
  • Supports 1/10/25/40/50 and 100Gb Ethernet to optical interfaces
  • Based on Mellanox Spectrum Switch silicon
  • Industry leading, true cut through latency
  • Optimized for Software Defined Networking
    • Support for OpenFlow Switch Specification Version 1.0 to 1.4 and beyond
    • Remote configurable routing table
  • 6.4Tb/s switching capacity delivering wire speed performance at all packet sizes and traffic patterns
  • Dynamically shared, flexible packet buffering
  • Overlay and tunneling support including VXLAN, NVGRE, Geneve and MPLS
  • Data Center Bridging (DCB)
    • PFC, DCBX, ETS

1/10/25/40/100Gb Ethernet Control Plane Switch

  • Supports 10/25/40/100Gb Ethernet to backplane
  • Supports 1/10/25/40/50 and 100Gb Ethernet to optional front panel optical interfaces
  • Based on Marvell Prestera-DX Switch silicon
  • Layer-2 Wire-Speed Switching Engine
    • IEEE 802.1Q-compliant bridging
    • Large Forwarding Database (FDB) providing exact-match lookup for MAC entries, IGMPv3/MLDv2 IP Multicast, FCoE entries, and Router Host entries
    • Learning and forwarding based virtual ports (ePorts) and virtual bridge domains (eVLANs) for L2/VSI overlay services
    • L2 ECMP and Link Aggregation Groups (LAGs) for load sharing and fast failover
    • IEEE 802.1w (RSTP) and 802.1s (MSTP)
  • Virtual Overlay Network supporting NVGRE, VXLAN-GPE, GENEVE, SPB, and 802.1BR port extender
  • Supports two-step and one-step Precision Time Protocol (PTP) per the IEEE 1588v1/v2 standard

Optional Front Panel I/O

  • Individual Ethernet and USB UART for Control and Data Plane processors
  • Two Data Plane 1/10/25/40/50/100Gb Ethernet optical connections
  • One Control Plane 1/10/40Gb Ethernet optical connection
  • Status LEDs

System Management

  • System Management using Intelligent Platform Management Interface (IPMI)
  • Diagnostic monitoring and configuration
  • Current, Voltage and Temperature Monitoring Sensors
  • Hot Swappable (exclusive to WILDSTAR OpenVPX EcoSystem)

Mechanical and Environmental

  • 3U OpenVPX (VITA 65) Compliant 1.0″ spacing
  • Supports new SOSA/VITA 65 switch profile SLT3-SWH-6F1U7U-14.4.14 and SLT3-SWH-6F8U-14.4.15
  • Integrated Heat Sink and Board Stiffener
  • Available in Industrial Temperature Grades
  • Air, Air Flow Through or Conduction Cooled
  • Hot Swappable with air cooled variants
  • Only requires +12V and +3.3VAUX from backplane
  • Developed in alignment with the SOSA™ Technical Standard
  • RT3 backplane connectors for 100G support

The following documentation is available for registered users of our site. Please log in or feel free to register for our site.

Technical Documents

Product Images
Tags: