WILD WHDMF1 ADC & DAC HSS
This high-bandwidth COTS ADC and DAC Card is designed for demanding Direct RF applications requiring very high ADC and DAC data rates and bandwidth.
Compatible with any WILDSTAR mainboard with a WILD Mezzanine Card HSS (WMC-H) Site. Examples: WILDSTAR 3XV5 for 3U and WILDSTAR 6XV2 for 6U.
The WILD WHDMF1 ADC & DAC HSS is optimized for High-Speed Serial I/O.
It integrates Jariet Technologies Electra-MA Transceiver. Two-channel 10-bit ADCs/DACs run at up to 64.0/61.4 GSps. Double the channel count by utilizing two Cards on a 6U Baseboard.
See all of the Annapolis Mezz Cards.
General
- Uses Jariet Technologies Electra-MA Transceiver
- Supports JESD204C interface with 16 lanes up to 30Gbps (dependent on mode configuration)
- Capability to have two ADC and two DAC channels in one 3U OpenVPX slot when plugged into WILDSTAR OpenVPX FPGA mainboards
- Capability to have four ADC and four DAC channels in one 6U OpenVPX slot when plugged into WILDSTAR OpenVPX FPGA mainboards
- Compatible with any WILDSTAR mainboard with a WILD Mezzanine Card HSS (WMC-H) Site
- Firmware and Software Board Support Interface provided in Open CoreFire Next and VHDL source
ADC Performance
- Channels: 2
- Sample Rate: 40 to 64.0 GSps
- Resolution: 10 Bits in full-Nyquist
- Spurs corrected to 12b resolution in full-Nyquist
- Analog Input Bandwidth:
- 14GHz (-3dB) typical
- 16GHz (-6dB) typical
- Maximum Instantaneous Bandwidth: 6.4GHz
- Run Time Selectable ADC Decimation: 8-1024x
- 16b or 12b resolution for each I and Q decimated output
DAC Performance
- Channels: 2
- Sample Rate: 40 to 61.5 GSps
- Resolution: 10 Bits in full-Nyquist
- Usable Analog Bandwidth: 36GHz
- 15 GHz -3dB Bandwidth at 61.5 GSps
- Maximum Instantaneous Bandwidth: 6.4GHz
- Run Time Selectable DAC Interpolation: 8-1024x
- 16b or 12b resolution for each I and Q decimated output
I/O Connectors
- Six 50Ω VITA 67 Connectors
- Two Analog ADC Inputs
- Two Analog DAC Outputs
- One External Sample Clock Divided by 16 Input
- One Optional External PLL Reference Input
Clock Synchronization
- Software-selectable external clock input or onboard PLL clock
- All ADCs and DACs across multiple mezzanine cards can be synchronized to the precision advertised by the vendor using WILDSTAR Clock Distribution Boards
Mechanical and Environmental
- Integrated Heatsink and EMI / Crosstalk Shields
- Commercial and Industrial Temperatures Available
- Air, Air-Flow-Through or Conduction Cooled
The following documentation is available for registered users of our site. Please log in or feel free to register for our site.
Technical Documents
For additional documentation, please contact your Sales Representative.