Tag Archives: UltraScale

One Kintex® UltraScale™ XCKU115 or Virtex® UltraScale+™ XCVU5P/XCVU7P FPGA with up to 10 GB of DDR4 DRAM for up to about 40 GB/s of DRAM bandwidth. Up to 1.7 million logic cells and 5520 DSP slices per board.  Also features WFMC+ mezzanine I/O site with stacking support, on-board Zynq Quad ARM CPU, and 1Gb Ethernet Switch.

One Virtex® UltraScale+™ XCVU9P FPGA with up to 10 GB of DDR4 DRAM for up to about 40 GB/s of DRAM bandwidth. Up to 2.8 million logic cells and 9216 DSP slices per board.  Also features WFMC+ mezzanine I/O site with stacking support, on-board Zynq Quad ARM CPU, and 1Gb Ethernet Switch.

One or two Xilinx® Kintex® UltraScale™ XCKU115 or Virtex® UltraScale+™ XCVU5P/XCVU9P/XCVU13P FPGAs. Up to 20 GB of DDR4 DRAM for up to 80 GB/s of DRAM bandwidth. Up to 7.5 million logic cells and 11.5 million multiplier bits per board.

Features a WILD FMC+ (WFMC+) next generation I/O site. WFMC+ supports 32 HSS and 100 LVDS I/O for higher density ADC and DAC solutions.  WFMC+ also supports stacking two I/O cards, for maximum performance per slot.

Deploy in your system, or see Annapolis' fully-integrated and qualified PCIe Server.

WILDSTAR™ UltraKVP ZP 3PE for OpenVPX 6U boards include three Xilinx® Kintex® UltraScale™ XCKU115 or Virtex® UltraScale+™ XCVU5P/XCVU9P FPGAs with High Speed Serial connections performing up to 32 Gbps. There is also an on-board Xilinx® Zynq® UltraScale+™ MPSoC Quad ARM CPU running up to 1.3 GHz which can be used for local application requirements without requiring an additional Single Board Computer (SBC).

DEPLOYMENT EXAMPLE: Digital Beamforming Case Study

RTMs facilitate high-speed and general-purpose I/O transfers between WILDSTAR™ 6U OpenVPX motherboards and other components.

This Rear Transition Module is compatible with WILDSTAR UltraK and WILDSTAR A10 6U OpenVPX motherboards.

WILDSTAR™ UltraKVP 2PE for 6U OpenVPX boards include one or two Xilinx® Kintex® UltraScale™ XCKU115 or Virtex® UltraScale+™ XCVU5P/XCVU9P FPGAs with High Speed Serial connections performing up to 16.3 Gbps. There is also an on-board dual ARM Cortex-A9 Processor running up to 766 MHz which can be used for local application requirements without using PCIe bandwidth.

Up to two identical Xilinx® Kintex or Virtex UltraScale FPGAs with choice of Kintex™ UltraScale KU085 or KU115 or Virtex™ UltraScale VU125 FPGAs. Up to 80 GB of DDR4 DRAM for up to 116 GB/s of DRAM bandwidth. Up to 2.5 million logic cells and 5.4 million multiplier bits per board.

The WILD CS0 Hybrid PCIe and Ethernet Switch combines PCIe and Ethernet switching into one card.

It is Annapolis-designed, and manufactured in USA.

See all of our Chassis and Backplane Accessories.