Tag Archives: 3U

One Kintex® UltraScale™ XCKU115 or Virtex® UltraScale+™ XCVU5P/XCVU7P FPGA with up to 10 GB of DDR4 DRAM for up to about 40 GB/s of DRAM bandwidth. Up to 1.7 million logic cells and 5520 DSP slices per board.  Also features WFMC+ mezzanine I/O site with stacking support, on-board Zynq Quad ARM CPU, and 1Gb Ethernet Switch.

High-bandwidth backplane connectivity is enabled by MULTIGIG RT3 interconnects, which deliver 100Gb per Fat Pipe. The new high-density RT3 boosts VPX backplane speeds to a remarkable 25 Gbaud, without sacrificing signal integrity.

Need the same SOSA-alignment and 100GbE capability in a 6U VPX form factor? See the WILDSTAR 6XB2 6U OpenVPX Board.

WILD100 6-Slot 3U OpenVPX Backplane is a rugged 3U Backplane that incorporates slots for up to four Payload Boards, one Switch, and one VITA 62 supply, delivering up to 700W. It is SOSA-aligned and 100GbE-capable.

See all of the Annapolis Chassis and Backplanes.

WILDSTAR 3E10 3U OpenVPX Switch is a rugged 3U board that provides switching between backplane slots of multiple channels of 100Gb Ethernet. It also has front panel I/O which can be used to connect the system to external data sources.

This high-performance Switch is readily integrated into a vendor-neutral 3U VPX system, or deployed within Annapolis' proven WILD100 EcoSystem for 3U OpenVPX.

The WILDSTAR Gen2 RTM for 3U OpenVPX, a member of the WILD40/WILD100 EcoSystem™ for OpenVPX, performs high-speed, general-purpose I/O transfers between WILDSTAR OpenVPX Baseboards and other components. This hot-swappable card provides two USB ports, two Micro-D connectors, and three optional optical transceivers.

One Kintex® UltraScale™ XCKU115 or Virtex® UltraScale+™ XCVU5P/XCVU7P FPGA with up to 10 GB of DDR4 DRAM for up to about 40 GB/s of DRAM bandwidth. Up to 1.7 million logic cells and 5520 DSP slices per board.  Also features WFMC+ mezzanine I/O site with stacking support, on-board Zynq Quad ARM CPU, and 1Gb Ethernet Switch.

High-bandwidth backplane connectivity is enabled by MULTIGIG RT3 interconnects, which deliver 100Gb per Fat Pipe. The new high-density RT3 boosts VPX backplane speeds to a remarkable 25 Gbaud, without sacrificing signal integrity.

Need the same SOSA-alignment and 100GbE capability in a 6U VPX form factor? See the WILDSTAR 6XB2 6U OpenVPX Board.

One Kintex® UltraScale™ XCKU115 or Virtex® UltraScale+™ XCVU5P/XCVU7P FPGA with up to 10 GB of DDR4 DRAM for up to about 40 GB/s of DRAM bandwidth. Up to 1.7 million logic cells and 5520 DSP slices per board.  Also features WFMC+ mezzanine I/O site with stacking support, on-board Zynq Quad ARM CPU, and 1Gb Ethernet Switch.

One Virtex® UltraScale+™ XCVU9P FPGA with up to 10 GB of DDR4 DRAM for up to about 40 GB/s of DRAM bandwidth. Up to 2.8 million logic cells and 9216 DSP slices per board.  Also features WFMC+ mezzanine I/O site with stacking support, on-board Zynq Quad ARM CPU, and 1Gb Ethernet Switch.

The WILD40 Forced-Air, Conduction-Cooled 3U OpenVPX Chassis is an OpenVPX-compatible ATR that incorporates slots for up to four conduction-cooled 3U Annapolis OpenVPX FPGA Modules, one conduction-cooled 3U OpenVPX SBC and one conduction-cooled VITA 62 power supply. Plug-in Module slot spacing is 1″.

When Storage capability is needed, Annapolis offers the highest density OpenVPX storage solutions on the market, with up to 32.0 TB of capacity in a single 1” 3U slot, and up to 5 GB/sec read/write bandwidth. This hot-swappable board (10,000 insertion cycles) is 100GbE capable, and is developed in alignment with SOSA™.

Annapolis Storage Solutions are optimized for SIGINT, ELINT, EW, or other high-bandwidth storage applications.

The LVDS RTM For 3U OpenVPX, a member of the WILDSTAR™ /VPX family of high performance Mezzanine Cards, performs high-speed, general-purpose I/O transfers between WILDSTAR /VPX motherboards and other components. The card provides up to 56 single-ended lines and 32 differential LVDS pairs between a WILDSTAR /VPX processing board and an external system.