FPGA Boards - 3U

Annapolis FPGA boards are engineered for superior performance and maximum bandwidth. Both Xilinx and Intel FPGAs are leveraged to offer the best FPGA technology available and to fit customer preference, design requirements, and production schedule.

Following are Annapolis’ latest 3U boards. You can find all 3U boards listed below the table.

Part #	FPGA Type	SoC Type	Band-width	LVDS to Backplane	Cooling	Temp	Open Standards
WB3AS0 Contact Us for Specs	Stratix 10		40GbE		Air or Conduction	-40˚ to +70˚	VITA 65
WB3XM0 Contact Us for Specs	NA	UltraScale+	40GbE		Air or Conduction	-55˚ to +85˚	VITA 65
WB3XB0	UltraScale+	UltraScale+	40GbE	4	Air or Conduction or AFT	-55˚ to +85˚	VITA 65 VITA 66 VITA 67
WB3XB1	UltraScale or UltraScale+	UltraScale+	40GbE	4	Air or Conduction or AFT	-55˚ to +85˚	VITA 65 VITA 66 VITA 67
WB3XBM	UltraScale or UltraScale+	UltraScale+	100GbE	16	Air or Conduction or AFT	-55˚ to +85˚	SOSA VITA 65 VITA 66 VITA 67
WB3XZD	UltraScale	UltraScale+	40GbE	6	Air or Conduction	-40˚ to +70˚	VITA 65 VITA 66 VITA 67
WB3XUD	UltraScale	Zynq-7000	40GbE	6	Air or Conduction	-40˚ to +70˚	VITA 65 VITA 66 VITA 67
WB3XU1	UltraScale	Zynq-7000	40GbE	24	Air or Conduction	-40˚ to +70˚	VITA 65
WB3XUL	UltraScale	Zynq-7000	40GbE	24	Air or Conduction	-40˚ to +70˚	VITA 65

These FPGA cards paired with Annapolis OpenVPX-compliant 3U backplanes enable even the most bandwidth intensive applications.

If I/O is required, Annapolis offers extraordinary density, bandwidth and analog conversion choices. Each 3U card has one mezzanine IO site which can support up to two WILDSTAR™ Mezzanine cards.

Other 3U FPGA card features include Hot Swap, On-Board dual core PowerPC, Management Processor connected to OpenVPX IPMI Management Plane, backplane user IO (LVDS, HSS, IRIG, Clocking), front panel RJ45 for PowerPC and front panel SMA (IRIG, Clocking).

WILDSTAR 3XBM 3U OpenVPX FPGA Processor – WB3XBM

One Kintex® UltraScale™ XCKU115 or Virtex® UltraScale+™ XCVU5P/XCVU7P FPGA with up to 10 GB of DDR4 DRAM for up to about 40 GB/s of DRAM bandwidth. Up to 1.7 million logic cells and 5520 DSP slices per board. Also features WFMC+ mezzanine I/O site with stacking support, on-board Zynq Quad ARM CPU, and 1Gb Ethernet Switch.

High-bandwidth backplane connectivity is enabled by MULTIGIG RT3 interconnects, which deliver 100Gb per Fat Pipe. The new high-density RT3 boosts VPX backplane speeds to a remarkable 25 Gbaud, without sacrificing signal integrity.

The 3XBM is part of Annapolis’ growing Wild100 EcoSystem™, an interoperable portfolio of rugged high-performance 100Gb VPX COTS boards and systems.
Tags:
- FPGA,
- OpenVPX,
- 3U,
- Xilinx,
- Kintex,
- UltraScale,
- Virtex
More Info
WILDSTAR 3XB1 3U OpenVPX FPGA Processor – WB3XB1

One Kintex® UltraScale™ XCKU115 or Virtex® UltraScale+™ XCVU5P/XCVU7P FPGA with up to 10 GB of DDR4 DRAM for up to about 40 GB/s of DRAM bandwidth. Up to 1.7 million logic cells and 5520 DSP slices per board. Also features WFMC+ mezzanine I/O site with stacking support, on-board Zynq Quad ARM CPU, and 1Gb Ethernet Switch.
Tags:
- FPGA,
- OpenVPX,
- 3U,
- Xilinx,
- Kintex,
- UltraScale,
- Virtex
More Info
WILDSTAR 3XB0 3U OpenVPX FPGA Processor – WB3XB0

One Virtex® UltraScale+™ XCVU9P/XCVU11P FPGA with up to 10 GB of DDR4 DRAM for up to about 40 GB/s of DRAM bandwidth. Up to 2.8 million logic cells and 9216 DSP slices per board. Also features WFMC+ mezzanine I/O site with stacking support, on-board Zynq Quad ARM CPU, and 1Gb Ethernet Switch.
Tags:
- FPGA,
- OpenVPX,
- 3U,
- Xilinx,
- Kintex,
- UltraScale,
- Virtex
More Info
WILDSTAR UltraKVP ZP DRAM for 3U OpenVPX – WB3XZD

One Xilinx® Kintex® UltraScale™ XCKU115 or Virtex® UltraScale+™ XCVU5P/XCVU9P FPGA with up to 20 GB of DDR4 DRAM for up to about 40 GB/s of DRAM bandwidth. Up to 2.8 million logic cells and 3.3 million multiplier bits per board. Also features WFMC+ mezzanine I/O site with stacking support, on-board Zynq Quad ARM CPU, and 1Gb Ethernet Switch.
Tags:
- FPGA,
- OpenVPX,
- 3U,
- Xilinx,
- Kintex,
- UltraScale,
- Virtex
More Info
WILDSTAR UltraK Low Power for 3U OpenVPX – WB3XUL

One Xilinx® Kintex® UltraScale™ KU085 or KU115 FPGA with up to 1.2 million logic cells and 2.68 million multiplier bits per board. Also features WFMC+ mezzanine I/O site with stacking support, and on-board Zynq Dual ARM CPU.
Tags:
- FPGA,
- OpenVPX,
- 3U,
- Xilinx,
- Kintex,
- UltraScale,
- Wild40 EcoSystem for OpenVPX,
- lower power
More Info
WILDSTAR UltraKVP DRAM for 3U OpenVPX – WB3XUD

One Xilinx® Kintex® UltraScale™ XCKU115, Virtex® UltraScale™ XCVU125/XCVU190 or Virtex® UltraScale+™ XCVU5P/XCVU9P FPGA with up to 20 GB of DDR4 DRAM for up to about 40 GB/s of DRAM bandwidth. Up to 2.8 million logic cells and 3.3 million multiplier bits per board. Also features WFMC+ mezzanine I/O site with stacking support, on-board Zynq Dual ARM CPU, and 1Gb Ethernet Switch.
Tags:
- FPGA,
- OpenVPX,
- 3U,
- Xilinx,
- Kintex,
- UltraScale,
- Virtex
More Info
WILDSTAR UltraK SRAM for 3U OpenVPX – WB3XU1

One Xilinx® Kintex® UltraScale™ KU085 or KU115 FPGA with up to 18 MB of QDR-IV SRAM for 28.8 GB/s of SRAM bandwidth. Up to 1.2 million logic cells and 2.68 million multiplier bits per board. Also features WFMC+ mezzanine card with stacking support, on-board Zynq Dual ARM CPU and PCIe Gen3 Switch.
Tags:
- FPGA,
- OpenVPX,
- 3U,
- Xilinx,
- Kintex,
- UltraScale
More Info
WILDSTAR 7 for 3U OpenVPX

One VX690T or VX980T Virtex 7 FPGA per board with up to 2 GB of DDR3 DRAM for 12.8 GB/s of DRAM bandwidth and up to 32 MB of QDRII+ SRAM for 8 GB/s of SRAM bandwidth. Up to 1 million logic cells and 1.6 million multiplier bits per board. Air Cooled Only.
Tags:
- Virtex 7,
- OpenVPX,
- 3U,
- WILDSTAR 7
More Info